Tone Dialing Switch-over
If your telephone company requires pulse dialing, you can
If your phone is set to pulse dialing mode, make your call normally. Once your call connects, press the */tone/
key. Any digits you enter from then on will be sent as tone digits. When this particular call ends, the phone automatically returns to pulse dialing mode.
Traveling Out of Range
During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the range limits of the base unit, you will hear a beep and see Out of Range on the display, and then the handset returns to standby mode. You may return to the call if you move your handset within the range limits of the base
and press talk/flash or within 30 seconds.
w w w . u n i d e n . c o m | B A S I C S [ 3 2 ] |
B A S I C S