RCA H5450 manual Replacing the Batteries, Cordless Handset Battery, Handset Memory Retention

Page 62

Advanced Functions, Systems and Settings

Replacing the Batteries

NOTE: A warning tone will sound 10 minutes before the battery goes dead.

Cordless Handset Battery

1.Make sure the telephone is OFF (not in Talk mode) before you replace the battery.

2.Remove the battery compartment door.

3.Disconnect the cord attached to the battery pack from the jack inside the battery compartment and remove the battery pack.

4.Insert the new battery pack and connect the plug on the battery pack to the jack inside the compartment.

NOTE: Only use the same type of Nickel Metal Hydride (Ni-MH ) battery that was originally supplied

NOTE: It is important to maintain the polarity (black and red wires) to the jack inside the compartment. To ensure proper battery installation, the connector is keyed and can be

inserted only one way.

5.Close the battery compartment by pushing the door up until it snaps into place.

6.Place the Cordless Handset in the charging cradle.

Battery

Handset

Back Cover

Black Wire

NOTE: Allow the Cordless Handset battery to properly charge (for 12 hours) prior to first use or when you install a new battery pack. If you do not properly charge the phone, battery performance will be compromised.

NOTE: The Cordless Handset may feel warm to the touch after charging.

Handset Memory Retention

When the battery is disconnected, the Cordless Handset has the capability to hold the user memory and Caller ID memory for up to 5 minutes.

62

Image 62

Contents Model H5450 Important Information Important Information Equipment Approval InformationLicensing Interference InformationHearing Aid Compatibility FCC RF Radiation Exposure Statement Do not OpenIntroduction IntroductionTable of Contents Table of Contents Safety Precautions Impotrant Installation InformationImportant Installation Information Installation GuidelinesParts Checklist Make sure your package includes the following itemsInstalling the Charging Cradle and AC Adaptor Connections and SetupCordless Handset Installation Installing the Cordless Handset BatteryInstalling the Charging Cradle Wall Mount Registering the Cordless Handset Registering the Cordless HandsetDeregister Cordless Handset Deregister HS Features Cordless Handset LayoutCordless Handset Charging Cradle Layout LCD display FeaturesEnd/Power Button Talk ButtonRedial Soft Button Menu System Adjust Settings and RegistrationLeft and Right Soft Buttons Pre-DialingMute Voice Mail Indicator LightHeadset Jack Flash buttonCall Transferring Intercom ButtonCall Forwarding Conference CallingCall Waiting Extension GroupsMaking a Call Using Your RCA 25450 Phone SystemUsing Your RCA 25450 Phone System Auto Line-Selection DialManual Line-Selection Dial Pre-Dialing RedialTo Save a Number from the Redial Log to the Directory Receiving a CallTo Delete a Number from the Redial Log Putting Calls on Hold Switching Between Audio ModesEnding a Call Call Waiting Transferring a Call to Another Extension Advanced Functions, Systems and SettingsAdvanced Functions, Systems and Settings Announced Call TransferIntercom Calls Making an Intercom CallReceiving an Intercom Call End an Intercom CallIgnore and Override an Incoming Line or Intercom Call Making an Outbound Line CallVoice Mail VM Configure VMReset Extension Passwords Making an Outbound Intercom CallChange Extension Password Voice Mail Box Management OptionsPlay greeting Record greetingVoice Mail Box Management Options Offsite Delete greetingAccess Voice Mail Play New MessagesTo view the caller ID information, press the soft button Play Old Messages Soft button Access VM Offsite Location Advanced Functions, Systems and Settings Navigate Directory DirectoryDirectory Keypad Character Selection Add EntryDelete Entry Edit EntryView Number Add Extension From Cordless Handset Clear AllThree-Way Conference Calls Add Phone Line From Cordless Handset Call a Displayed Number Call LogView Call Log Modify Logged NumbersSave Displayed Caller ID Information into the Directory Delete Displayed Caller ID Information From the Call LogClear All Caller ID Information from the Call Log ButtonMenu System SoundSound Receiver, Speakerphone, or Headset Voice VolumeRing Volume and Vibrate Settings Ring Tone Key Volume Key ToneTurn On Dialing Prefix Phone SettingsDialing Prefix Edit Local Area Code LAC Area CodesTurn Off Dialing Prefix Edit Regional Area Code RAC Enable Call Forwarding Selecting a Group ID number Extension Group SettingDisable Call Forwarding Advanced Functions, Systems and Settings Manual Line Selection Setting Auto or Manual Line Selection Settings Auto Line-Selection Setting Second Incoming Call 2nd Call Alert Configure Second Incoming Call 2nd Call AlertUsing Cordless handset for Second Incoming Call Attaching the Belt Clip Headset jackHandset Memory Retention Cordless Handset BatteryReplacing the Batteries Battery Safety Precautions Display Messages Other InformationOther Information Other Information Telephone Troubleshooting TipsTroubleshooting Tips Troubleshooting Tips General Product Care Causes of Poor ReceptionInterference Information Service Information ServiceWarranty Information Limited WarrantyIf you purchased your product outside the USA Mounting Template Wall Mount Template for Cordless HandsetWall Mounting Bracket Template for Cordless Handset This page is intentionally blank Replacement battery English