Polycom IP 600 SIP manual Time and Date, Headset Memory Mode, Display Contrast, Ring Type

Time and Date is clearly displayed on the SoundPoint® IP 600 SIP telephone. (Accu- racy is maintained through server control.) Contact your System Administrator if either time or date is incorrect. Users have control over the format of the display. Select a format which is right for you as follows:

2.Select Settings followed by Clock.

3.Select from Clock Date or Clock Time or Clock Order.

4.Scroll through the options via the up and down arrow keys.

5. Press Select to confirm and Menu to return directly to the idle display.

Headset Memory Mode

As an option, the headset can be permanent- ly enabled to place and receive calls from any audio keys on the telephone - especially useful for regular headset users. To do this:

2.Select Settings followed by Headset Memory.

3.Use the up or down arrows and Select soft key to enable Headset Memory Mode.

4. Press Menu to return to the main menu.

Subsequent calls to or from this tele- phone using the headset will cause the headset key to flash. Pressing the line keys or the Answer soft key to receive a call will now connect to the user’s head- set automatically.

Repeat steps 1-3 and select Disable to turn Headset Memory Mode off.

Ring Type

Many ring types are available. Users can select different rings to distinguish between lines (on a multiple line configured tele- phone) or to have a different ring from their neighbor’s telephone.

To change the incoming ring to a desired sound:

1. Press Menu . Select Settings fol-

lowed by Ring Type.

2.(Optional) If multiple lines are used, first select which line to change.

3.Using the arrow keys, highlight the desired ring type. Press the Play soft key to hear the selected ring type.

4.Press Select to change to the se- lected ring type.

5. Press Menu or the Exit soft key to return to the idle display.

See also Distinctive Ringing / Call Treatment.