![](/images/new-backgrounds/1289724/2897249x1.webp)
Installing SoundPoint® IP 600 SIP
This section provides basic installation instructions and information for obtaining the best performance with the SoundPoint IP® 600 SIP telephone. If you require additional information or assistance with your new telephone, please contact your System Administrator.
The SoundPoint® IP 600 SIP User Guide includes regulatory compliance infor- mation that your System Administrator should review and can also be found at http://www.polycom.com.
Connecting Network and Power Source
AC Power Option
Connect the supplied Network cable between the LAN jack on the telephone and the LAN port on the wall or hub/switch device port. Connect the DC plug on the AC wall adapter to the DC jack marked on the telephone.
In-Line Power Option
If the telephone is connected to a compatible Ethernet switch that can provide
Cisco™ Catalyst™
Power Switch
(Optional)
IEEE 802.3af compliant
2