![](/images/new-backgrounds/1289724/28972417x1.webp)
Using SoundPoint® IP 600 SIP
Placing a Call
Using the Handset:
1. To obtain dial tone, pick up the handset.
2. Dial the desired number. | During a call, users can alternate | ||
OR | between handset, headset, or | ||
handsfree modes by pressing the | |||
Dial by SIP URL/IP address†: | |||
or | keys. | ||
| |||
• After obtaining dial tone, press Name |
|
| |
|
| ||
• Enter URL or IP (press * for “.” and # |
|
| |
for “@”) |
|
| |
• Press Send to complete the call. |
|
|
Using Handsfree Speakerphone Mode:
1.With the handset , or NewCall to obtain dial tone.
2.Dial the desired number.
OR
Dial by SIP URL or IP address† as above.
Using the Headset: |
|
| |
1. With the optional headset connected, press |
| ||
any assigned line key, | , or NewCall to |
| |
See also Headset Memory Mode. | |||
obtain dial tone. |
| ||
|
|
2.Dial the desired number.
OR
Dial by SIP URL or IP address† as above.
Users also have the option to dial directly from the dial pad without first getting dialtone. Simply enter the number then lift the handset or press the
Dial soft key or press the or
keys.
In all cases, the active call will appear on the dis- play showing call duration and destination.
†Examples: 10.3.0.42 | To obtain the IP address of your telephone, |
joe@205.173.1.24 | press Menu followed by System Status and |
sip: jane@polycom.com | General. The IP address is listed together |
| with other network information. |
|
|
6