Mitel MITEL 5603 manual Call Handling for the Mitel 5000 CP, Accessing Features

Page 29

Call Handling for the Mitel 5000 CP

Tip: These feature descriptions apply to the use of the 5603 Wireless Handset on the Mitel 5000 CP Release 6.0 and higher.

During a call you may need to use features, such as Hold, Transfer, Conference, and Call Swap.

You access these features during a call by pressing the "More" soft key. It displays the "In Call" menu depicted in the following image.

Note: These options are visible if the Mitel 5000 menu template has been installed on the 5603 Wireless Handset. The default menus reflect the features that operate with MCD.

Figure 7: Accessing Features

*Visible if enabled/defined in the PDM/WSM3

**Visible if the Admin menu is activated.

***Visible if the Admin menu is activated. You require the DECT location license.

Image 29

Contents Communications Director and 5000 Communications Platforms Trademarks Iii Wireless Handset User Guide Advanced Functions Admin Menu Clear Lists in Charger Wireless Handset User Guide 5603 Handset About Your PhoneSound off key Description of Your HandsetFeatures and Functions Chargers Contacting Emergency ServicesDesktop Charger Rack ChargerExposure to Radio Frequency Signals Tips for your Comfort and SafetyFrequency Range Dont cradle the handsetChemical Resistance Icons and Text in the DisplayEnvironmental Requirements Icons Menu icons Keys and ButtonsNavigation Key Volume ButtonSound off Key Key Lock, and Upper/Lower Case KeyAlphanumeric Keys Standby mode, and number input modeText input mode Headset Turn the Audible Signal On/Off Switch the Handset On/OffCustomizing Your Phone Lock/Unlock the KeypadLock/Unlock the Keypad during a Call Lock/Unlock the HandsetMake a Call Making and Answering CallsDuring a Call Answer a CallDial a Number from the Company Phonebook Answer a CallOpen Contacts during the Call Adjust the Volume during a CallTurn the Microphone on/off during a Call Start a New Call during ConversationCall Handling for MCD 3300 ICP Accessing FeaturesTo retrieve the Held Call HoldTransfer Method ConferenceAnswer Call Waiting Call Park CallbackCall Pickup Advanced Features for MCD 3300 ICPCall Forward Direct Do Not DisturbGroup LoudspeakerCall Handling for the Mitel 5000 CP Retrieve a Held Call Conference Call Operator Advanced Features for the 5000 CPReverse Transfer Config AssistantCheck the Voice Mail Inbox Voice MailReceive a Voice Mail Contacts Navigate the Menu Enter/Exit the Menu ModeCalls Menu TreeContacts Settings Call Call List Call MenuMissed Calls Contact MenuCall Time Call ContactAdd Contact Edit ContactAdd New Contact Add from Call ListCentral Phonebook Delete ContactSearch by Name Search by NumberSound and Alert Settings Settings MenuTime & Date Settings Display SettingsSelect Headset Profile Set Time FormatSet Date Format Phone Lock settingsActivate the Automatic Key lock Activate the Phone LockDeactivate the Phone Lock AnsweringChange PIN Code Answering KeyCharger Change the Menu LanguageChange Owner ID Change System Subscribe Handset in IP-DECT System using Easy RegistrationSystem Rename System Subscribe Handset in IP-DECT System ManuallyUnsubscribe System Priority Clear Lists in Charger Admin MenuAdvanced Functions System Handling Software Upgrade and Additional FeaturesError or Warning Messages TroubleshootingOperational Problems PDM LED Error IndicationsOperation Notice Accessibility and Voice QualityOperating Area Out of RangeMaintenance of Batteries MaintenanceBattery Warnings Charge the BatteryAttach the Hinge-type Clip Easy Replaceable BatteryAttach the Swivel-type Clip Easy ReplacementEasy Replacement Procedure Before Starting Easy Replacement ProcedureEasy Replacement Procedure using the 5603 Programmer Related Documents LED Indications during Easy ReplacementMitel 5603 Wireless Handset User Guide Index Index