Targus I640, e340 manual PN 72-1084-02-D.doc

SpectraLink Corporation	Setup and Administration—NetLink e340/i640 Wireless Telephone
	Mitel Networks 3300 and SX-200 ICP and 5220 IP Phone emulation

Noise Mode Select Noise Mode to adjust the Wireless Telephone for background noise. Select Normal: for most office environments; High: for moderate background noise; or Severe: for extremely noisy conditions. Use of the non-Normal modes is not recommended unless you are in a loud environment or you may find it difficult to be heard on your Wireless Telephone.

Alias IP Addr This option displays the IP address currently used for this Wireless Telephone by the SVP Server for communications with the call server.

Current IP This option displays the IP address currently assigned to the Wireless Addr Telephone. The IP address is not set here; it is merely displayed and may

not be changed.

Extension This option allows you to enter the user extension for this Wireless Telephone. This number is for display purposes only; entering it does not assign the extension in the host telephone system.

Mitel options This option displays the ports being utilized for receiving data at the Wireless Telephone.

Push-to-talkThis option displays the menu for the two way radio feature in the NetLink i640 Wireless Telephone. The Channel option allows you to select a channel 1-8 to send and receive radio messages. The Enable/Disable option allows you to enable or disable the radio feature. See the NetLink i640 Wireless Telephone end-user document for more information about push-to-talk.

(Additional options may be present. Contact your system administrator for information.)

PN: 72-1084-02-D.doc Page 24