Weslo R 7.2 user manual Assembly

ASSEMBLY

To hire an authorized service technician to assemble the treadmill, call 1-800-445-2480. Assembly requires two persons. Set the treadmill in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. Note: After shipping, there may be an oily substance on the exterior of the treadmill. This is normal. If there is an oily substance on the treadmill, simply wipe it off with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included hex keys		and your own Phillips screwdriver		, rubber	.
mallet	, adjustable wrench	, wire cutters	, and needlenose pliers

Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number after the parentheses is the quantity needed for assembly. Note: Some small parts may have been pre-assembled. To avoid damaging parts, do not use power tools for assembly. Extra parts may be included.

1/4" Star		1/4" Washer		5/16" Star		3/8" Star
Washer (11)–6							3/8" Washer
		(31)–2		Washer (5)–4		Washer (9)–4
							(10)–2
		1/4" Nut (4)–4		3/8" Nut (13)–4		Wheel Spacer
						(83)–4
#8 x 1/2"		#8 x 3/4"	1/4" x 1/2"		1/4" x 1 1/2" Bolt (3)–6		5/16" x 3/4"
Screw (12)–1	Screw (7)–6		Screw (6)–4
							Screw (2)–4
	3/8" x 2 1/4" Bolt (8)–6					3/8" x 2 1/2" Bolt (1)–2

6