Weslo WETL20708.0 user manual Operation and Adjustment, PRE-LUBRICATED Walking Belt

Page 11

OPERATION AND ADJUSTMENT

THE PRE-LUBRICATED WALKING BELT

 

 

Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili-

cone spray or other substances to the walking belt or the walking platform. Such substances will deterio-

rate the walking belt and cause excessive wear.

1

 

HOW TO PLUG IN THE POWER CORD

Socket on Treadmill

This product must be earthed. If it should malfunction or break

 

down, earthing provides a path of least resistance for electric cur-

 

 

rent to reduce the risk of electric shock. This product is equipped

 

Power

with a power cord having an equipment-earthing conductor and an

 

earthing plug. IMPORTANT: If the power cord is damaged, it

 

Cord

must be replaced with a manufacturer-recommended power

 

 

cord.

2

Adapter

See drawing 1. Plug the indicated end of the power cord into the

socket on the treadmill.

Screw

Cover

See drawing 2. Press the pins on the power cord into the metal clips

 

 

in the adapter as shown. Close the adapter cover over the end of the

 

Pins

power cord and tighten the screw in the adapter. IMPORTANT:

Adapter

Make sure that the adapter cover is secure and that the screw

Metal

has been tightened before using the power cord.

 

Clips

See drawing 3. Plug the power cord into an appropriate outlet that is

3

Outlet

properly installed and earthed in accordance with all local codes and

ordinances. IMPORTANT: The treadmill is not compatible with

 

 

RCD-equipped outlets.

 

 

DANGER: Improper connection of the equipment-earthing conductor can result in an in- creased risk of electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether the product is properly earthed. Do not modify the plug provided with the product—if it will not fit the outlet, have a proper outlet installed by a qualified electrician.

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No. WETL20708.0 Serial No QUESTIONS?DecalTable of Contents Pulse sensor is intended only as an exer Important PrecautionsVarious factors, including your movement May affect the accuracy of heart rate readingsInstructions Before YOU Begin Assembly Handrails 34, 86. Make sure not to pinch Wire Harness See the inset drawing. Tie the wire tieOn the Base 79. Make sure not to pinch Wire Harness See the inset drawing in . Tie the wire tieConnector Console Back Connectors Crossbar 83. Make sure that no wires are Pinched See the lower drawing. Press the end Two small inset drawings. Using your finCareful not to crack the Motor Hood not Shown Avoid losing the Gas Spring Clip. Note ExtraPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Monitor your progress with the display. As you exer HOW to USE the ConsoleInsert the key into the console. See Start the walking belt Measure your heart rate if desired HOW to Level the TreadmillHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Lower the Treadmill for USE Displays of the console do not function properly TroubleshootingProblem Solution Power turns off during useWalking belt. If the walking belt has shifted to Top View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using Exercise Frequency Exercise GuidelinesExercise Intensity Workout GuidelinesKey No. Qty Description Part LIST-Model No. WETL20708.081627 Exploded Drawing B-Model No. WETL20708.0 R0908A Exploded Drawing C-Model No. WETL20708.0 R0908A Recycling Information Ordering Replacement Parts
Top Page Image Contents