Weslo WETL20708.0 user manual Connector Console Back Connectors

Page 8

3.Attach the Console Plate (81) to the Handrail Crossbar (83) with two M8 x 16mm Bolts (1) and two M8 Star Washers (5). Make sure the

Console Plate is oriented as shown and that the Wire Harness (84) is not pinched. Remove the wire tie from the Wire Harness (84).

3	83	81

84

5 15 1 Wire Tie

4.Remove the console back and the four M4.2 x 12mm Screws (3) from the Console (80). Save the console back and the Screws for step 6. Hold the Console (80) near the Console Plate (81). Touch the Console Plate to discharge any static.

Next, press the connector on the end of the Wire Harness (84) into the connector on the back of the Console (80) in the location shown.

See the inset drawing. The connectors should slide together easily and snap into place. If they do not, turn the connector on the Wire Harness and try again. IF THE CONNEC-

TORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.

4		80
Connector		80
Console	84		81
Back	84		81
		3	Connectors
	3		84

8

Image 8

Contents QUESTIONS?Decal Model No. WETL20708.0 Serial NoTable of Contents Important Precautions Various factors, including your movementMay affect the accuracy of heart rate readings Pulse sensor is intended only as an exerInstructions Before YOU Begin Assembly See the inset drawing. Tie the wire tie On the Base 79. Make sure not to pinch Wire HarnessSee the inset drawing in . Tie the wire tie Handrails 34, 86. Make sure not to pinch Wire HarnessConnector Console Back Connectors Crossbar 83. Make sure that no wires are Pinched Two small inset drawings. Using your fin Careful not to crack the Motor Hood not ShownAvoid losing the Gas Spring Clip. Note Extra See the lower drawing. Press the endPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Monitor your progress with the display. As you exer HOW to USE the ConsoleInsert the key into the console. See Start the walking belt HOW to Level the Treadmill Measure your heart rate if desiredHOW to Fold and Move the Treadmill HOW to Move the TreadmillHOW to Lower the Treadmill for USE Troubleshooting Problem SolutionPower turns off during use Displays of the console do not function properlyWalking belt. If the walking belt has shifted to Top View Problem The walking belt slows when walked onKey and Unplug the Power CORD. Using Exercise Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyPart LIST-Model No. WETL20708.0 Key No. Qty Description81627 Exploded Drawing B-Model No. WETL20708.0 R0908A Exploded Drawing C-Model No. WETL20708.0 R0908A Ordering Replacement Parts Recycling Information