HOW TO USE A PRESET WORKOUT
1.Insert the key into the console.
See HOW TO TURN ON THE POWER on page 13.
2.Select one of the four preset workouts. To select a preset work-
out, press the Workout Select button repeat- edly; “P- 1,” “P- 2,” “P- 3,” or “P- 4” will appear in the priority display for
a few seconds to show which workout is selected. The maximum speed of the workout and the dura- tion of the workout will also appear in the display for a few seconds.
Each workout consists of 30
3.Start the walking belt.
Press the Start button or the Digital Speed in- crease button to start the workout. When you press the button, the treadmill will automatically adjust to the speed setting that is programmed for the first segment. Hold the handrails and begin walking.
At the end of each segment, a series of tones will sound. If a different speed setting is programmed
for the next segment, the speed setting will flash in the display to alert you and the treadmill will auto- matically adjust to the new speed setting. The workout will continue in this way until the last seg- ment ends. The walking belt will then slow to a stop.
If the speed setting is too high or too low during the workout, you can manually override the setting by pressing the Digital Speed buttons; however, when the current segment of the workout ends, the treadmill will automatically adjust to the speed setting for the next segment.
To stop the workout temporarily, press the Stop button. The time will begin to flash in the display. To restart the workout, press the Start button or the Digital Speed increase button. The walking belt will begin to move at 1 mph. When the next segment begins, the treadmill will automatically adjust to the speed setting programmed for the next segment.
4.Follow your progress with the displays. See step 4 on pages 13 and 14.
5.Measure your heart rate if desired. See step 5 on page 14.
6.When you are finished exercising, remove the key from the console.
See step 6 on page 14.
15