In daytime with lens cup on it is normal to observe a fuzzy image. Switching on night
vision device in daytime is intended for testing purposes only.
The rotating switch has four positions: “Off”, “Auto”, “On”, “IR”. In Auto mode the monocular will turn off automatically in the upright position. This mode saves battery life and allows avoiding greenish shadow on the face, which may disclose the user.
FIGURE 2
IR illuminator indicator (red, left), Low battery indicator (yellow, right, optional)
Note: The “Auto” switch position is optional.
6.3Switching the Unit off
After you finished using the device, turn it off by rotating switch
(1)to OFF position. Put protective lens cap on the lens. Remove the battery from the battery compartment to avoid any damage of the device in case of electrolyte leakage.
6.4Adjusting to individual vision
Turn on the device. Direct the device to an object placed within
13