Newcon Optik Night Vision Monocular/Goggles, NVS 14 manual Using the Unit with head gear or helmet

Page 19

6.7Using the Unit with head gear or helmet

The Unit is supplied with head gear (5, Fig. 1). Prior to using head gear adjust its straps so that the head gear fits head comfortably but firmly and does not slide when you are moving.

The Unit is attached to the head gear with a swing arm mount (1, Fig. 3). To attach the arm mount to the head gear loosen the tightening screw (8, Fig. 1) on head gear, slide helmet groove (2,

	6		Technical
			Technical
			drawing of US
			clip mount

				1
	2
		3
		5		4
				4
FIGURE 3
1.	“Swing arm” mount	4.		Unit groove
2.	Grooved pad	5.		Flip button
3.	Locking knob	6.		US clip mount

Fig. 3) onto the rail, and then tighten the screw.

To attach monocular to the arm turn the knob (3, Fig. 3), slide arm groove (4) along the dove tail platform of the monocular (10, Fig. 1), and then release the knob.

15

Image 19

Contents Operator’s Manual Night Vision Monocular / GogglesPage Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Features Some typical activities where NVS 14 can be usefulOverview Page Delivery SET Optional accessoriesSpecifications Unit Design Main parameters Image Intensifier Tube SpecificationsSpatial frequency-contrast characteristics MTF Field of view cleanness Schematic drawing Operation Instructions Installing batteryAdjusting to individual vision Switching the Unit offAuto shut OFF at bright light FocusingUsing the Unit with head gear or helmet Swinging Unit for unobstructed view Using IR illuminatorUsing the camera / video adapter Demist shield and sacrificial window Using the helmet mountLocking screw NVS 14 with Picatinny adapter Mounting on a riflePage Binocular configuration Troubleshooting What This Warranty Does Not Cover WarrantyFrom USA only Customer SupportFrom all other countries Acceptance Certificate Night Vision Device Newcon Optik