The adapter (Fig. 5) consists of 2 rings:
a)Camera adapter is 52x1 mm. It fits the filter lens thread of various cameras, e.g. Nikon.
b)Video adapter is 37x1mm. It fits Sony cameras and some others.
If our adapter does not fit your camera obtain a proper step up / step down rings.
FIGURE 5
Camera / Video adapter
6.12Demist shield and sacrificial window
Note: Demist Shield and Sacrificial Window are optional.
Sacrificial window protects the objective lens from the abrasive influence of sand and dust at night time. It should be put on the objective lens like an objective cap with the daylight filter.
Demist shield filter protects the eyepiece against fogging. To install it fold the eyecup to the very bottom to get the full access to the thread, and screw the filter gently onto the eyepiece.
6.13Using the helmet mount
The Unit can be equipped with an optional helmet mount. This mount can be customized to fit a wide range of existing helmet models.
The mount is attached to a helmet with stripes.
18