Newcon Optik Night Vision Monocular/Goggles, NVS 14 manual Locking screw

The unit is fixed to the mount by a locking screw (1) (Fig.

6). To adjust the position of the Unit to your eye level use the screw (4). To adjust the eye relief first loosen locking screw (1) and set a comfortable distance between the eyes and the eyepiece; then tighten the locking screw back.

You can fixate the unit in three predetermined positions: vertical, horizontal, and 15-20 degrees above horizontal. Although the relative angles between these positions cannot be changed, the starting point can be adjusted by screws (3). If you loosen them, you can rotate the flip-flop mechanism to find the suitable starting point. Tighten the screws (3) after the adjustment.

You can raise the Unit for unobstructed view without taking the helmet off. To do so press (and hold) the button (2) and rotate the

FIGURE 6

1.	locking screw	3.	flip-flop adjusting screws
2.	flip/flop button	4.	mount binding screw

1 2 3 4

19