Newcon Optik NVS 14, Night Vision Monocular/Goggles manual Binocular configuration

Page 26

6.15Binocular configuration

Two Units can be combined to form a two-eye construction with the help of an optional bridge. Lens can be attached to form a binocular optical system.

To form a double-unit system use the dove tail platform (10, Fig.1) located on both sides of the Unit. These platforms are identical. The tightening screw (8) locks monoculars to the bridge. You can use the double-eye construction in a goggle (mounted on a head gear) or hand held configuration.

FIGURE 9

FIGURE 10

Binocular configuration

Binocular configuration with

 

attached 3x lenses

In the two-eye configuration the interpupilary distance between the eyepieces can be adjusted between 58 and 72 mm.

22

Image 26
Contents Night Vision Monocular / Goggles Operator’s ManualPage Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Overview Some typical activities where NVS 14 can be usefulFeatures Page Optional accessories Delivery SETSpecifications Unit Design Image Intensifier Tube Specifications Main parametersSpatial frequency-contrast characteristics MTF Field of view cleanness Schematic drawing Installing battery Operation InstructionsSwitching the Unit off Adjusting to individual visionFocusing Auto shut OFF at bright lightUsing the Unit with head gear or helmet Using IR illuminator Swinging Unit for unobstructed viewUsing the camera / video adapter Using the helmet mount Demist shield and sacrificial windowLocking screw Mounting on a rifle NVS 14 with Picatinny adapterPage Binocular configuration Troubleshooting Warranty What This Warranty Does Not CoverFrom all other countries Customer SupportFrom USA only Acceptance Certificate Night Vision Device Newcon Optik