Newcon Optik Night Vision Monocular/Goggles, NVS 14 manual Using the camera / video adapter

Page 21

6.10Installation of add-on lenses.

Always make sure that the monocular is switched off when you put on or pull off the add-on lens.

FIGURE 4

NVS 14 with attached 5x lens

Note: The following procedure is identical for 3x or 5x lenses (or any other add-on lenses).

Turn off the monocular. Remove the rubber lens cap. Put the lens on top of the monocular and press it firmly towards the eyepiece. Do not apply excessive pressure. Make sure that the lens is fixed well on the monocular. To return the monocular back to 1x magnification, pull the lens off.

6.11Using the camera / video adapter

Before using the (optional) adapters, remove the rubber eyepiece carefully.

17

Image 21

Contents Operator’s Manual Night Vision Monocular / GogglesPage Important Information Precautions Table of Contents Warranty Customer Support Acceptance Certificate Some typical activities where NVS 14 can be useful FeaturesOverview Page Delivery SET Optional accessoriesSpecifications Unit Design Main parameters Image Intensifier Tube SpecificationsSpatial frequency-contrast characteristics MTF Field of view cleanness Schematic drawing Operation Instructions Installing batteryAdjusting to individual vision Switching the Unit offAuto shut OFF at bright light FocusingUsing the Unit with head gear or helmet Swinging Unit for unobstructed view Using IR illuminatorUsing the camera / video adapter Demist shield and sacrificial window Using the helmet mountLocking screw NVS 14 with Picatinny adapter Mounting on a riflePage Binocular configuration Troubleshooting What This Warranty Does Not Cover WarrantyCustomer Support From USA onlyFrom all other countries Acceptance Certificate Night Vision Device Newcon Optik