Scanning regime the unit repeatedly measures and displays results every second while A button is pressed.
To activate Scanning regime press and hold Action button in Ready mode. The unit will work in Scanning regime while Action button is pressed.
Scanning or Individual Measurement regimes are available for any selected mode of measurement. When two or more parameters are measured in Scanning regime though first result will be displayed, the second and other results will be shown at the display if Action button is released. Nevertheless all data is transferred to the PC and recorded in internal memory, and may be recalled (see Data Recall mode for details.)
Operation and service modes
Pressing Mode button (5, Fig.1) in Ready mode switches the unit between modes of operation, to activate any desired mode from the menu you must confirm your selection by pressing Action button (6, Fig.1). The unit has the following modes of operation:
Ready – Unit is ready to perform measurements
dFLt – sets default mode of operation with factory settings,
GAtE – allows to set gating distance for measurement
14