Newcon Optik LRB 6000CI operation manual Accuracy correction

Page 20

oAUtO – Last Target Measurement*

oPLGr – Communication to PLGR GPS*

oPC – Communication to PC*

oReticule – Change reticule from + (cross) to ⁯ (rectangle)

oCAL – Compass calibration

▪CALc – compass calibration (CI model only)

▪Corr – accuracy correction of active parameters

*not shown in the menu if currently selected

Accuracy correction

If the System produces any measurement errors that lie beyond unit specification, it may be an indication that unit requires calibration similar to one conducted at production level. To do accuracy correction, please select Corr from CAL menu.

Perform correction according to required measurement parameters by pressing Action button, see table below:

16

Image 20

Contents LRB 6000CI Page Important Information Read prior to activationPage Table of Contents Brief Description Key Features of the LRB 6000CI Laser Rangefinder Binoculars Device Appearance Front viewRear view Display Delivery SET Specifications OpticsRange Finder Or ⁯Power CompassInclinometer EnvironmentalInstalling the battery Operation InstructionsUsing the Device Factors affecting measuring distance Target selection logic Individual Measurement and Scanning regimesOperation and service modes Page Accuracy correction Std Sd, d DCESetting interface format Compass calibrationGating mode Data Recall mode Computer interconnectivity Short mode switching scheme GPS interconnectivityBest Measuring Technique Page Storage and Maintenance Troubleshooting Black dots are visible on LCDWarranty What This Warranty Does Not CoverAll other countries Customer SupportUS customers Quality Certificate Page Page Newcon Optik