Newcon Optik LRB 6000CI operation manual Computer interconnectivity

Page 25

Computer interconnectivity

The unit supports RS-232 interface. Physical connection is performed through connector with threaded coupling mechanism, designed for the heavy-duty outdoor applications.

Note: Do not apply excessive force when disconnecting cable. Damage to cable or connector resulting from improper treatment is not covered by warranty.

To attach the cable to the rangefinder match the key on the plug (1, Fig. 5) with the corresponding key on the socket and then push gently the plug holding it by its casing (3, Fig. 5) until click.

To detach the cable slide sleeve (2, Fig. 5) away from the unit and pull the plug out.

The communication port must be initiated prior to connecting the unit to the computer. The data is transmitted as hex string code with fixed baud rate of 38400 bit/sec, 8 bits, one stop bit, and no parity.

21

Image 25

Contents LRB 6000CI Page Read prior to activation Important InformationPage Table of Contents Brief Description Key Features of the LRB 6000CI Laser Rangefinder Binoculars Front view Device AppearanceRear view Display Delivery SET Optics SpecificationsRange Finder Or ⁯Compass PowerInclinometer EnvironmentalOperation Instructions Installing the batteryUsing the Device Factors affecting measuring distance Individual Measurement and Scanning regimes Target selection logicOperation and service modes Page Accuracy correction DCE Std Sd, dCompass calibration Setting interface formatGating mode Data Recall mode Computer interconnectivity GPS interconnectivity Short mode switching schemeBest Measuring Technique Page Storage and Maintenance Black dots are visible on LCD TroubleshootingWhat This Warranty Does Not Cover WarrantyUS customers Customer SupportAll other countries Quality Certificate Page Page Newcon Optik