Newcon Optik LRB 6000CI operation manual Troubleshooting, Black dots are visible on LCD

Page 30

8. TROUBLESHOOTING

Ranging does not work. The display is transparent.

Check the charge of the battery. Replace it if it is weak.

Ranging does not work. The display indicates results of the last measurement.

Wait for 8 seconds until the display becomes transparent, and press the Action button again.

Black dots are visible on LCD.

Liquid Crystal Display may have small black dots, scratches and other blemishes inherited from the manufacturing process. These flaws are strictly regulated by number, area and location and do not degrade the product's measurement capabilities.

Range measurement cannot be obtained.

∙Make sure that neither your hand nor finger is blocking objective lens, laser emitting lens or receiver lens.

∙Hold the unit firmly (avoid hand tremor) while pressing the Action button.

∙Check that the target is within measuring range of the device and the gating mode does not cut it off.

Image 30

Contents LRB 6000CI Page Important Information Read prior to activationPage Table of Contents Brief Description Key Features of the LRB 6000CI Laser Rangefinder Binoculars Device Appearance Front viewRear view Display Delivery SET Range Finder SpecificationsOptics Or ⁯Inclinometer PowerCompass EnvironmentalInstalling the battery Operation InstructionsUsing the Device Factors affecting measuring distance Target selection logic Individual Measurement and Scanning regimesOperation and service modes Page Accuracy correction Std Sd, d DCESetting interface format Compass calibrationGating mode Data Recall mode Computer interconnectivity Short mode switching scheme GPS interconnectivityBest Measuring Technique Page Storage and Maintenance Troubleshooting Black dots are visible on LCDWarranty What This Warranty Does Not CoverCustomer Support US customersAll other countries Quality Certificate Page Page Newcon Optik