Newcon Optik LRB 3000PRO operation manual Operation Instructions, Environmental, Mechanics

Page 13
9

Environmental

-25 / +50oC (-13 / +122oF)

Operational temperature range

Storage temperature range

-45 / +65oC (-49 / +149oF)

Mechanics

 

Tripod thread

¼” x 20 TPI

Weight without battery

970 g

Dimensions

158x145x70 mm

5. OPERATION INSTRUCTIONS

Preparing device for operation.

-Rotate the battery compartment cover (5, Fig. 1) counter clockwise and pull it open

-Connect and insert battery into the battery compartment.

-Close the battery compartment cover (5, Fig. 1).

-Adjust the interpupillary distance with lever (7, Fig. 2).

-Adjust the eye relief distance by moving collapsing eyepieces (1, Fig. 1) in lengthwise direction.

The unit is fully operational when battery voltage is over 6.3V. A ‘LOW BATTERY’ warning is displayed voltage falls below 6.5V.

The unit may be powered with 9V batteries capable to sustain

350 mA current drain:

•Standard 9V battery may be used as a short term solution. It will last for about 30-45 minutes of continuous operation.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents LRB 3000PRO Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Device Appearance Page Display Optional accessories SpecificationsDelivery SET Standard delivery setRange Finder PowerSpeed measurement CompassEnvironmental Operation InstructionsMechanics Preparing device for operationMeasurement procedure Target selection logic Factors affecting measuring distanceIndividual Measurement and Scanning regimes Operation and service modes Page Sd, d Accuracy correctionCompass calibration Data Recall mode Best Measuring Technique Storage and Maintenance Compass readings are equal to zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Serial number Quality CertificateNewcon Optik
Top Page Image Contents