Newcon Optik LRB 3000PRO operation manual Storage and Maintenance

Page 23

7. STORAGE AND MAINTENANCE

The unit is a sophisticated precision optical instrument equipped with laser and electronics. Therefore, it should be handled with due care.

Keep it away from direct sunlight.

Avoid impacts, jolts, dust, moisture, and sharp changes of temperature.

Do not use the device at temperatures higher than 50oC (122oF).

Do not touch optical surfaces. Doing so may damage the anti-reflection coating.

Clean optical surfaces only with professional camera lens cleaning supplies.

Clean the exterior of the unit with a soft clean cloth.

Keep away from heating appliances and central heating.

Remove the battery when storing the device for long time.

All repair works must be performed by an authorized service.

Prevent bright light from focusing through the eyepiece.

19

Image 23 Contents
LRB 3000PRO Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Device Appearance Page Display Standard delivery set SpecificationsOptional accessories Delivery SETCompass PowerRange Finder Speed measurementPreparing device for operation Operation InstructionsEnvironmental MechanicsMeasurement procedure Target selection logic Factors affecting measuring distanceIndividual Measurement and Scanning regimes Operation and service modes Page Sd, d Accuracy correctionCompass calibration Data Recall mode Best Measuring Technique Storage and Maintenance Compass readings are equal to zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Serial number Quality CertificateNewcon Optik
Related manuals
Manual 28 pages 19.41 Kb