Newcon Optik LRB 3000PRO operation manual Important Information, Read prior to activation

Page 3

IMPORTANT INFORMATION

Read prior to activation

You have just purchased a sophisticated electro-optical device that emits invisible laser radiation. To operate it properly, please, read this manual carefully.

•NEVER direct laser beam at the eyes of people or animals

•NEVER aim the unit at the Sun or bright sources of light

•NEVER subject the unit to impacts

•NEVER transport the unit without its case

•NEVER disassemble the unit. This may be hazardous for you due to high voltage currents

•ALWAYS keep the unit out of the reach of children

•ALWAYS remove the battery when the device is not in use for a long period

•ALWAYS store the unit in a dry place

•Caution - use of controls or adjustments, or performance of procedures other than those specified herein may result in hazardous radiation exposure

•Caution - use of optical instruments such as binoculars, loupes, mirrors, lenses, etc. with this product increases eye hazard

•Avoid eye exposure to direct laser beam or its close reflection

•Prevent bright light from focusing through the eyepieces iii

Image 3
Contents LRB 3000PRO Page Read prior to activation Important InformationPage Table of Contents Principle of operation Brief DescriptionKey Features Device Appearance Page Display Standard delivery set SpecificationsOptional accessories Delivery SETCompass PowerRange Finder Speed measurementPreparing device for operation Operation InstructionsEnvironmental MechanicsMeasurement procedure Target selection logic Factors affecting measuring distanceIndividual Measurement and Scanning regimes Operation and service modes Page Sd, d Accuracy correctionCompass calibration Data Recall mode Best Measuring Technique Storage and Maintenance Compass readings are equal to zero at any direction TroubleshootingWhat This Warranty Does Not Cover WarrantyCustomer Support Serial number Quality CertificateNewcon Optik