to check the camera aim and focus before taking a new photo. To turn the unit off, press and hold the MODE button until the display goes out and the camera beeps 3 times. The camera will turn itself off automatically to save batteries if it is left inactive for one minute. When connected to a PC for downloading photos, the camera draws power from the USB port.
TURNING THE DISPLAY ON AND OFF
Press the Display button (right side of the large
TAKING A PICTURE
With the camera turned on, press the SNAP button to take a new photo. For best results, hold the ImageView steady using both hands. Lightly press down the SNAP button using the flat end of your finger, then release it. Avoid “punching” the SNAP button rapidly with a fingertip, resulting in shaky photos. You will hear two quick beeps to confirm a photo was taken, and briefly see a screen displaying the remaining photo capacity (now one less), battery indicator, and resolution setting (1 or 3 stars).
REVIEWING AND DELETING STORED PICTURES
You may review previous images currently stored in the camera’s memory by either scrolling through them one at a time, or seeing a “slide show” which automatically displays and changes images. To see individual images, just press the UP (most recent to oldest photo) or DOWN (oldest photo first) buttons on the
2