Heath Zenith 9600LED series warranty Features, Requirements, Unpacking, Installation

Page 1

Dated receipt required for warranty replacement.

Features

Automatically comes on when motion is detected.

Automatically turns light off.

Photocell keeps the light off during daylight hours.

Requirements

The light control requires 120 volts AC.

If you want to use Manual Override mode, the control must be wired through a switch. NOTICE: Not to be used on light dimmer or timer- controlled circuits.

Some electrical codes require installation by a qualified electrician.

This light fixture has been tested/certified us- ing Lights of America LED Lamp Model No. 2025LEDE12.

Unpacking

Be sure to remove all contents from packaging and verify all items are present before assembling this light fixture. This package includes the following items:

Lantern

Three LED Lamps

(Lights of America Model: 2025LEDE12)

Universal mounting bracket (X-Bar)

Mounting hardware

Wire nuts

Owner’s Manual

Motion Sensing Diecast Metal Lantern

Model: 9600LED Series

INSTALLATION

For best performance, mount the fixture about 6 feet (1.8 m) above the ground.

1.Remove two decorative nuts.

2.Remove X-Bar.

3.Tighten mounting screws on X-Bar finger tight.

4.Attach X-Bar to junction box.

Lantern Base

 

X-Bar

 

 

 

 

 

 

 

 

Decorative Nut

Lantern Mounting

Screw

Junction Box

X-Bar

Bracket Mounting

Screw

Note: We recommend having an assistant help hold the lantern assembly during the wiring process.

© 2008

598-1338-03

Image 1
Contents Installation FeaturesRequirements UnpackingRecommended Grounding Method WiringMasterSlave Optional WiringMasterMaster Final Assembly Turn on the circuit breaker and light switch Testing and AdjustmentsSpecifications Manual override Mode Adjustment of Coverage AreaMode Switching Summary OperationSymptom Possible Cause Solution Troubleshooting GuideTWO Year Limited Warranty Instalacion CaracterísticasRequisitos DesempaqueAdvertencia Desconecte la energía en el cortacircuito CableadoMétodo recomendado de conexión a tierra Maestra Esclava Conexion AlternaMaestra Maestra Bombillas Montaje del aparato Vatios máximo Cada una Conecte el disyuntor y el interruptor de la luz Pruebas Y AjustesResumen de las modalidades Del interruptor OperaciónFase de Sobre control Manual Regulación DEL Área DE CoberturaGuia DE Investigacion DE Averias EspecificacionesGarantía Limitada DE DOS Años Exigences CaractéristiquesDéballage Câblage Méthode de mise à la terre recommandéeMaître Satellite Câblage FacultatifMaîtreMaître Assemblage Final InstallationRé-enclenchez le disjoncteur puis ouvrez l’interrupteur Essais ET RéglagesFonctionnement Mode Contournement ManuelRéglage DE LA Zone DE Couverture Guide DE Dépannage Fiche TechniqueContournement Auto Ment ManuelGarantie Limitée DE Deux ANS