Smooth Fitness 735 user manual Cleaning, To apply lubricant under the walking belt

Page 23

www.smoothfitness.com

23

MAINTAINENCE

To apply lubricant under the walking belt:

1.Position the walking belt so that the seam is located on top and in center of the walking board.

2.Insert the nozzle of the lubricant container under the belt

3.While lifting the side of the walking belt, position the nozzle between the walking belt and the board approximately 15 cm (6 inches) from the front of the treadmill. Apply the silicone lubricant to the walking board, moving from the front of the treadmill to the rear. Repeat this on the other side of the belt. Note: it is important to get the lubricant as far to the center of the walking board as possible.

4.Allow the silicone to "set" for 1 minute before using the treadmill.

Apply lubricant from front to back.

CLEANING:

Routine cleaning of your treadmill will extend the product's life.

Warning: To prevent electrical shock, be sure the power to the treadmill is OFF and the power cord is unplugged from the wall electrical outlet before attempting any cleaning or maintenance.

Important: DO NOT use abrasives or solvents to clean the treadmill. To prevent damage to the computer, keep liquids away and keep it out of direct sunlight.

After each workout: Wipe off the console and other treadmill surfaces with a clean, water dampened soft cloth to remove excess perspiration.

Weekly: Use of a treadmill mat is recommended for ease of cleaning. Dirt from your shoes contacts the belt and eventually makes it to underneath the treadmill. Vacuum underneath treadmill once a week.

Note: when lubricating the belt, make sure the treadmill is located on a surface that can be easily cleaned. After lubricating your treadmill running belt, clean any excess silicone off the belt and frame.

Image 23
Contents Motorized Treadmill For future service or related questions PrecautionsPour réparations futures ou questions connexes Power Requirements Power RequirementsAlimentation Open the boxes Before YOU Begin302 301 308 307 311 310 303 304 305 306 312 209 309 313 Supplied Components / Supplied HardwareHardware Kit 735i Complete Parts ListAdaptor IHP 735i Fan Fan cover Bolt M3*30mm Bolt M3*8mm Parts Diagram Parts Diagram 735i Treadmill 303 Assembly Please Read ALL Steps Before Beginning Your WorkAttach Console to Left and Right Uprights Attach the Handle Bars Assembly309 Attach the upright covers onto the uprights 313209 Unfold Horizontal AdjustmentFold Up Maintainence HOW to Maintain Your TreadmillTo apply lubricant under the walking belt CleaningBefore beginning Important StepsTargeted muscle groups Muscle ChartWarm up and cool down Stretching RoutineRead carefully the following before using your treadmill Computer Operation Dot-matrix Safety Key PadGender WeightStop / Reset Display Function ProgramSET UP User Profile Mode P2 Program Computer Operation Computer Operation Computer Operation 36 735i Treadmill Computer Operation P4 Fitness test P3 HRCHeart Rate ControlMusic jack Music Jack UsageUSB Charger: Symptom Cause Solution TroubleshootingLimited Home USE Warranty Smooth Fitness Treadmill Warranty Limited Warranty888.800.1167