32
735i TREADMILL
COMPUTER OPERATION
P2 Program:
1.Press 【Program Select】key to select 【PROGRAM】 then press enter to enter the program. There are 15 preset programs.
2.Press the Speed ㄧ / 十 to change the program【SPEED WEIGHT LOSS】、【SPEED ROLLING HILLS】、【
SPEED TRAINING INTERVAL】、【SPEED SUMMIT】、【ENDURANCE TRAINING SPEED INTERVAL】、【 INCLINE WEIGHT LOSS】、【INCLINE ROLLING HILLS】、【INCLINE TRAINING INTERVAL】、【ENDURANCE TRAINING INCLINE INTERVAL】、【MOUNTAIN SUBMMIT】、【VALLEY RUN】、【CROSS TRAINING】、【
COMBINATION INTERVAL TRAINING】、【CROSS COUNTRY】、【MOUNTAIN JOG】then press【Enter】to select program.
3.Set time: press the Speed ㄧ / 十 to set time then press【Enter】to confirm.
4.Set level: press the Speed ㄧ / 十to set level then press【Qucik Start】to begin the workout..
5.Beginning the workout：
5.1.The speed or incline will change automatically according to the program settings, the speed or incline will change every 2 minutes per segment if the time is in count up mode, if time is entered during setup then the segment time=set time / 20. You can use any speed or incline key to change speed or incline during your workout.
5.2.The program will end when the counter reaches 0. Then enter cool down.
6.Preset program profiles:
SPEED WEIGHT LOSS： Each Level speed value (incline=0)
Seg. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
L1 | 1.5 | 2.0 | 2.5 | 3.0 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.5 | 3.0 | 2.5 | 2.0 | 1.5 |
L2 | 2.0 | 2.5 | 3.0 | 3.5 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 4.0 | 3.5 | 3.0 | 2.5 | 2.0 |
L3 | 2.5 | 3.0 | 3.5 | 4.0 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.5 | 4.0 | 3.5 | 3.0 | 2.5 |
L4 | 3.0 | 3.5 | 4.0 | 4.5 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 5.0 | 4.5 | 4.0 | 3.5 | 3.0 |
L5 | 3.5 | 4.0 | 4.5 | 5.0 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.5 | 5.0 | 4.5 | 4.0 | 3.5 |
L6 | 4.0 | 4.5 | 5.0 | 5.5 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 6.0 | 5.5 | 5.0 | 4.5 | 4.0 |
L7 | 4.5 | 5.0 | 5.5 | 6.0 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.5 | 6.0 | 5.5 | 5.0 | 4.5 |
L8 | 5.0 | 5.5 | 6.0 | 6.5 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 7.0 | 6.5 | 6.0 | 5.5 | 5.0 |
L9 | 5.5 | 6.0 | 6.5 | 7.0 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.5 | 7.0 | 6.5 | 6.0 | 5.5 |
L10 | 6.0 | 6.5 | 7.0 | 7.5 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 8.0 | 7.5 | 7.0 | 6.5 | 6.0 |
SPEED ROLLING HILLS： Each Level speed value (incline=0) |
|
|
|
|
|
|
|
|
|
| ||||||||||
Seg. | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20 |
L1 | 1.5 | 2.0 | 2.5 | 3.0 | 2.5 | 2.0 | 1.5 | 2.0 | 2.5 | 3.0 | 2.5 | 2.0 | 1.5 | 2.0 | 2.5 | 3.0 | 2.5 | 2.0 | 1.5 | 1.5 |
L2 | 2.0 | 2.5 | 3.0 | 3.5 | 3.0 | 2.5 | 2.0 | 2.5 | 3.0 | 3.5 | 3.0 | 2.5 | 2.0 | 2.5 | 3.0 | 3.5 | 3.0 | 2.5 | 2.0 | 2.0 |
L3 | 2.5 | 3.0 | 3.5 | 4.0 | 3.5 | 3.0 | 2.5 | 3.0 | 3.5 | 4.0 | 3.5 | 3.0 | 2.5 | 3.0 | 3.5 | 4.0 | 3.5 | 3.0 | 2.5 | 2.5 |
L4 | 3.0 | 3.5 | 4.0 | 4.5 | 4.0 | 3.5 | 3.0 | 3.5 | 4.0 | 4.5 | 4.0 | 3.5 | 3.0 | 3.5 | 4.0 | 4.5 | 4.0 | 3.5 | 3.0 | 3.0 |
L5 | 3.5 | 4.0 | 4.5 | 5.0 | 4.5 | 4.0 | 3.5 | 4.0 | 4.5 | 5.0 | 4.5 | 4.0 | 3.5 | 4.0 | 4.5 | 5.0 | 4.5 | 4.0 | 3.5 | 3.5 |
L6 | 4.0 | 4.5 | 5.0 | 5.5 | 5.0 | 4.5 | 4.0 | 4.5 | 5.0 | 5.5 | 5.0 | 4.5 | 4.0 | 4.5 | 5.0 | 5.5 | 5.0 | 4.5 | 4.0 | 4.0 |
L7 | 4.5 | 5.0 | 5.5 | 6.0 | 5.5 | 5.0 | 4.5 | 5.0 | 5.5 | 6.0 | 5.5 | 5.0 | 4.5 | 5.0 | 5.5 | 6.0 | 5.5 | 5.0 | 4.5 | 4.5 |
L8 | 5.0 | 5.5 | 6.0 | 6.5 | 6.0 | 5.5 | 5.0 | 5.5 | 6.0 | 6.5 | 6.0 | 5.5 | 5.0 | 5.5 | 6.0 | 6.5 | 6.0 | 5.5 | 5.0 | 5.0 |
L9 | 5.5 | 6.0 | 6.5 | 7.0 | 6.5 | 6.0 | 5.5 | 6.0 | 6.5 | 7.0 | 6.5 | 6.0 | 5.5 | 6.0 | 6.5 | 7.0 | 6.5 | 6.0 | 5.5 | 5.5 |
L10 | 6.0 | 6.5 | 7.0 | 7.5 | 7.0 | 6.5 | 6.0 | 6.5 | 7.0 | 7.5 | 7.0 | 6.5 | 6.0 | 6.5 | 7.0 | 7.5 | 7.0 | 6.5 | 6.0 | 6.0 |