www.smoothfitness.com
15
ASSEMBLY – PLEASE READ ALL STEPS BEFORE BEGINNING YOUR WORK.
STEP1: Assemble Console Mast to Base Frame.
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or |
|
| |
pinch. DO NOT tighten any bolts until STEP2. |
|
| |
When attaching the Right upright (301) first attach the Lower Console Wire to the | 303 | X6 | |
fish wire in the upright. This will allow you to pull the data cable up through the | |||
upright during installation. | 304 | X6 | |
1). Attach Left and Right Uprights into base frame, and secure using 6 x | |||
|
| ||
M8x15mm Bolt (303) AND 6 x M8 Curve Washer (304). |
|
| |
Note: Hand tighten only do not fully tighten the bolts until step 2 is complete. |
|
|
Green plastic wrap
Clear plastic wrap
Bolts should be hand tight only