16 935i TREADMILL
ASSEMBLY
STEP 2: Attach the Console Mast to the Base Frame. |
|
|
NOTE: Make sure all wires are recessed into the frame. DO NOT trap or |
|
|
pinch the wires. DO NOT tighten any bolts until STEP4. |
|
|
Before attaching the Right upright (301) first wrap the fish wire (preinstalled from | 303 | X8 |
the factory in the right upright) to the computer data wire located on the base |
|
|
frame.fish wire in the upright. This will allow you to pull the data cable up through | 305 | X8 |
the upright during installation. | ||
1). Attach Left and Right Uprights into base frame, and secure using the 8 x |
|
|
M8x15mm Bolt (303) with 8 x M8 Washer (305). |
|
|
Caution Pinch point! Do not pinch wires between frame.
Green plastic wrap
Feed the computer wire through the upright tube
Clear plastic wrap
Fish wire
305
303
Computer wire location
Do not tighten bolts until step 3