4. Chain
-Ensure chain is oiled, clean and runs smoothly.
-Extra care is required in wet or dusty conditions.
5. Bearings
-Ensure all bearings are lubricated, run freely and display no excess movement, grinding or rattling.
-Check headset, wheel bearings, pedal bearings and bottom bracket bearings.
6. Cranks and Pedals
-Ensure pedals are securely tightened to the cranks.
-Ensure cranks are securely tightened to the axle and are not bent.
7. Derailleurs
-Check that front and rear mechanisms are adjusted and function properly.
-Ensure control levers are securely attached.
-Ensure derailleurs, shift levers and control cables are properly lubricated.
8. Frame and Fork
-Check that the frame and fork are not bent or broken.
-If either are bent or broken, they should be replaced.
9. Accessories
-Ensure that all reflectors are properly fitted and not obscured.
-Ensure all other fittings on the bike are properly and securely fastened, and functioning.
-Ensure the rider is wearing a helmet.
10