Pacific Cycle HF3305 manual Training Wheels, Option

Option 1

Option 2

Training Wheels

There are two options when attaching the training wheels to the wheel brace. Determine which option is used on your bicycle and follow the given instructions for that option.

Option 1

First attach the training wheels to the wheel brace. Position a washer on the shoulder bolt. Next, insert the shoulder bolt through the wheel. Follow with another flat washer then completely thread a hex nut onto the shoulder bolt. Insert the shoulder bolt through the wheel brace and set the washer on the shoulder bolt. Lock the training wheel into place by screwing another hex nut onto the shoulder bolt. Repeat for both training wheels.

Option 2

First attach the training wheels to the wheel brace. Insert the shoulder bolt through the wheel. Follow with a flat washer. Insert the shoulder bolt through the wheel brace and set the washer on the shoulder bolt. Lock the train- ing wheel into place by screwing another hex nut onto the shoulder bolt. Repeat for both training wheels.

It is very important to check the training wheel connection to the bicycle. Failure to properly tighten may cause the train- ing wheel to dislodge. Please contact Pacific Cycle Service with any questions.

59