3.Temporarily tighten the cable so that the link wire is at the position in
the illustration. | 3 |
| |
Link Wire |
|
Touching
|
| Cable Anchor Bolt |
|
| Spring tension |
|
| adjustment screw |
|
| Cable Casing Holder |
1 | 2 | 4. Turn the spring tension |
|
| adjustment screw so that the link |
|
| wire comes to a position directly |
|
| below the cable casing holder. |
2 1
1 mm
1
5. Secure one of the shoes at a time. The adjustment of the shoe clearance is not necessary at this time.
Shoe fixing nut tightening torque:
7.84 - 8.82 Nm (70 - 78 in. lbs.)
10 mm wrench
5 mm Allen key
6.If balance adjustment is necessary, adjust with the spring tension adjustment screw.
| Cut off any unneces- |
| sary cable, attach an end |
| cap, and hook it onto the |
2 | notched part of the nut |
| which secures the shoe. |
End cap
21
50