PROBLEM: The walking belt slows when walked on
SOLUTION: a. Use only a
b.If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be-
come damaged. Remove the key and | UNPLUG THE | |
POWER CORD | . Using the allen wrench, turn both |
rear roller adjustment bolts counterclockwise, 1/4 of a turn. When the walking belt is properly tightened, you should be able to lift each side of the walking belt 5 to 8 cm (2 to 3 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.
b |
Rear Roller Adjustment Bolts |
c. If the walking belt still slows when walked on, call our Customer Service Department
PROBLEM: The walking belt is |
| ||
SOLUTION: | a. If the walking belt is | ||
| and UNPLUG THE POWER CORD | . If the walking | |
| belt has shifted to the left, | use the allen wrench to | |
| turn the left rear roller bolt clockwise 1/2 of a turn; | if | |
| the walking belt has shifted to the right, | turn the | |
| bolt counterclockwise 1/2 of a turn. Be careful not to |
| |
| overtighten the walking belt. Plug in the power cord, |
| |
| insert the key, and run the treadmill for a few minutes. |
| |
| Repeat until the walking belt is centered. |
|
b. If the walking belt slips when walked on, first remove
the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise,
1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each side of the walk- ing belt 5 to 8 cm (2 to 3 in.) off the walking platform. Be careful to keep the walking belt centered. Plug in
the power cord, insert the key, and carefully walk on the treadmill for a few minutes. Repeat until the walk- ing belt is properly tightened.
a |
b |
21