PYLE Audio PCTL49820 user manual HOW to USE Programs Directly from OUR WEB Site, Changes

HOW TO USE PROGRAMS DIRECTLY FROM

OUR WEB SITE

Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are soon to be available. See www.iFIT.com for details.

To use programs from our Web site, the treadmill must be connected to your home computer. See HOW TO

CONNECT YOUR COMPUTER on page 14. In

addition, you must have an internet connection and

an internet service provider. A list of specific system requirements will be found on our Web site.

Follow the steps below to use a program from our

Web site.

1 Insert the key into the console.

See HOW TO TURN ON THE POWER on page 10.

2 Select the iFIT.com mode.

When the key is in- serted, the manual

mode will be selected and the manual indica-

tor will light. To use a program from our Web

site, press the Mode button repeatedly until the iFIT.com indicator lights.

3	Go to your computer and start an internet
	connection.
	Start your Web browser, if necessary, and go
4
	to our Web site at www.iFIT.com.

Follow the desired links on our Web site to se-

5 lect a program.

Read and follow the on-line instructions for using a program.

Follow the on-line instructions to start the

6 program.

When you start the program, an on-screen count- down will begin.

Return to the treadmill and stand on the foot

7rails. Find the clip attached to the key, and slide the clip onto the waistband of your clothes.

When the on-screen countdown ends, the program will begin and the walking belt will begin to move. Hold the handrails, step onto the walking belt, and begin walking.

	During the program, an electronic “chirping” sound
	will alert you when the speed of the treadmill is
	about to change.		CAUTION: Al		ways listen for the
	“chirp” and be prepared for speed				changes.
	If the speed setting is too high or too low, you can
	manually override the setting at any time by
	pressing the Speed buttons on the console.
	However, when the next “chirp” is heard, the
	speed will change to the next setting for the
	program.
	To stop the walking belt at any time, press the
	Stop button on the console. The Time display will
	begin to flash. To restart the program, press the
	Start button or the Speed			▲ button. After a mo-
	ment, the walking belt will begin to move at 1.0
	mph. When		the next “chirp” is heard, the speed
	will change to the next setting for the program					.
	When the program is completed, the walking belt
	will stop and the Time display w				ill begin to flash.
	Note: To use another program, press the Stop
	button and go to step 5.
	Note: If the speed of the treadmill does not
	change when a “chirp” is heard, make sure the
	iFIT.com indicator is lit and the Time display is
	not flashing. In addition, make sure that the
	audio cable is properly connected, that it is
	fully plugged in, and that it is not wrapped
	around a power cord.
	Follow your progress with the LED track and
8
	the four displays.
	See step 5 on page 10.
	Measure your heart rate if desired.
9
	See step 6 on page 11.
		When the program ends, remove the key.
10

See step 6 on page 12.