Image IMTL24490 user manual Assembly

Page 6

Assembly

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not

dispose of the packing materials yet. A phillips screwdriver (not included) is needed for assembly.

Note: The underside of the treadmill walking belt is coated with a special high-performance lubricant. During ship- ping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a normal condition and does not affect treadmill performance. If there is lubricant on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

1.With the help of a second person, carefully raise the Uprights (92) until the Wheels (119) are resting flat on the floor.

2.Remove the Lock Knob (105) from the Lock Pin (100).

Make sure that the Lock Pin Collar (102) and the Spring (103) are on the Lock Pin. Insert the Lock Pin into the Latch Bracket (104)

Tighten the Lock Knob (105) onto the Lock Pin (100).

Press a Bottle Holder Insert (115) into each side of the Console Base (116).

3.Insert the two Book Holder Caps (112) into the Book Holder (110) as shown. Attach the Book Holder to the Console Base (116) with the two Book Holder Screws (111). Be careful not to overtighten the Screws.

Note: Do not hold or push on the Book Holder (110) or the Book Holder may be damaged.

4.Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to protect the floor or carpet. Note: Keep the included allen wrench in a secure location. The allen wrench will be needed to adjust the walking belt (see page 25).

1
	92
	119
2	115
	115
	116
	103
	102
105	100
	104
3	110
	110
	116
	111
	112
	111
	112

6

Image 6

Contents Questions? Model No. IMTL24490 Serial NoCustomer HOT Line Table of Contents Important Precautions Page Before You Begin Assembly Moving your hands. When your How to Use the Hand Pulse SensorHow to Use the Chest Pulse Sensor Hand Pulse Sensor TROUBLE-SHOOTINGChest Pulse Sensor TROUBLE-SHOOTING Make sure that Battery is turned so Writing is onChest Pulse Sensor Care HOW to Plug in the Power Cord Performant Lubetm Walking BeltFeatures of the Console Select the Quick Start mode HOW to USE the Quick Start ModePlug in the power cord Enter your weight if desiredBiologix display HOW to USE a Heart Rate Program Insert the key into the consoleEnter your weight Enter your ageInsert the key fully into the console HOW to USE AN Incline ProgramWatch your progress with the main display Biologix display Select one of the Incline programsEnter your weight if desired Enter your sex HOW to USE the Fitness AGE TestEnter your height Press the Biologix Start buttonPress the Program Start button or the Speed + button HOW to Create a Custom ProgramHold the hand pulse sensor Select one of the Custom programsHOW to USE a Custom Program HOW to Measure Your Body FAT HOW to Select the Information Mode HOW to Adjust the Walking PlatformHOW to USE the Hand Weights How to Fold and Move the Treadmill HOW to Fold the Treadmill for StorageHOW to Move the Treadmill HOW to Lower the Treadmill for USE Symptom the Power Turns OFF During USE Maintenance and Trouble-shootingSymptom the Power does not Turn on Symptom AN Error Code E1 or E6 Appears on the ConsoleSymptom the Walking Belt is OFF-CENTER When Walked on Symptom the Walking Belt Slows When Walked onTop Exercise Steps Conditioning GuidelinesFactors in a Sensible Diet Target Heart Rate ZonesWeight Loss Tips Warm up before you beginStretch after your warm-up Cool down after aerobic exercise Benefits of Aerobic ExerciseGet FIT with the Image 14.6Q Stretch again at the end of your exercise SessionWorkout Tips Workout ProgramsPart List-Model No. IMTL24490 R0899AQty Description How to Order Replacement Parts Exploded Drawing-Model No. IMTL24490 105 Limited Warranty