Assembly: Parts Identifier
The Healthtrainer
Do not throw away any packing materials until the unit is working properly. Do not remove unit from box until it has been fully assembled.
Make sure the electrical cord will easily reach an electrical outlet.
If at anytime you need assistance with assembly, call
Locate the hardware pack and identify the following parts required for assembly.
Tools:
1.Allen Wrench- 3/16”
2.Allen Wrench- 7/32”
3.Phillips Screwdriver
U4T1 | U4T4 | U4T5 | U4D1 | UAT6 | UAT7 |
UAS29 | UAS30 | U4J24 | U4J5 | U4J7 | U4J27 |
U4J28U4J4U4T11 UAW8UAW9 UAW10
Ref # | Description | Qty |
| Ref # | Description | Qty |
U4T1 | MAIN FRAME | 1 |
| U4J24 | SCREW ST4.2*12 | 6 |
U4T4 | LEFT UPRIGHT | 1 |
| U4J5 | BOLT M10*25 | 12 |
U4T5 | RIGHT UPRIGHT | 1 |
| UAJ7 | BOLT M8x50 | 4 |
U4D1 | CONSOLE | 1 |
| U4J28 | FLAT WASHER 8 | 6 |
UAS29 | LEFT PROTECTION COVER | 1 |
| U4J27 | FLAT WASHER 10 | 12 |
UAS30 | RIGHT PROTECTION COVER | 1 |
| UAW8 | #6 ALLEN WRENCH | 1 |
UAT6 | LEFT HANDLEBAR | 1 |
| UAW9 | #5 ALLEN WRENCH | 1 |
UAT7 | RIGHT HANDLEBAR | 1 |
| UAW10 | WRENCH W/SCREW DRIVER | 1 |
U4T11 | CROSS BAR | 1 |
|
|
|
|