ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not
dispose of the packing materials until assembly is completed. A rubber mallet | may be needed for |
assembly. |
|
Note: The underside of the treadmill walking belt is coated with
1.With the help of a second person, carefully raise the Uprights (65) until the treadmill is in the position shown.
2.Press the Lock Knob Sleeve (68) into the left Upright
(65).If necessary, use a rubber mallet to tap the Lock Knob Sleeve into the Upright.
Remove the Lock Knob (67) from the Lock Pin (72). Make sure that the Lock Pin Collar (70) and the Spring
(69)are on the Lock Pin. Insert the Lock Pin into the left Upright (65) and tighten the Lock Knob onto the Lock Pin.
1 |
|
|
| 65 |
|
2 |
|
|
65 |
|
|
67 | 69 |
|
68 | 70 | 72 |
|
3.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see pages 25 and 26). To protect the floor or carpet from damage, place a mat under the treadmill.
5