3 ASSEMBLY
3.1UNPACKING
For safety, and to save time and effort, read this Owner’s Manual completely before installing your Life Fitness Treadmill. Place the treadmill near where it will be used before beginning the unpacking procedure.
These unpacking instructions assume you have already done the following:
Removed the top of the shipping carton.
Removed the corrugate packing material.
Removed these assembly instructions from the bridge assembly carton.
The best method for unpacking the rest of the treadmill proceeds as follows:
Remove the bridge assembly carton from the base unit.
Break down the sides of the inner shipping carton.
Remove the treadmill uprights from the shipping carton.
Assemble the treadmill. Once assembly is complete:
- Roll the treadmill off the shipping carton and to the location where it will be used.
The treadmill is bolted to a wooden pallet. Before moving the treadmill base off the pallet you must remove two bolts inside the motor pan. FAILURE TO REMOVE THE TWO BOLTS CAN CAUSE PERSONAL INJURY OR DAMAGE TO YOUR TREADMILL. Remove the motor cover. Unscrew the two bolts with a 1/2 inch socket wrench. Discard the bolts and washers. Continue with the assembly instructions as normal.
1/2”
1/2”
10