Front Fan Assembly
Description | Spare part number |
|
|
Front fan assembly |
|
|
|
The front fan assembly is attached to the front of the chassis.
1.Prepare the computer for disassembly (Preparation for Disassembly on page 37).
2.Remove the access panel (Computer Access Panel on page 39).
3.Remove the front bezel (Front Bezel on page 40).
4.Remove the baffle (Baffle on page 69).
5.Disconnect the fan cable from the red/brown system board connector labeled CHFAN.
6.Press the two tabs (left, bottom) that secure the fan assembly to the chassis front. Figure
7.Pull the assembly toward the rear of the unit, and then lift it out of the chassis. Figure
To install the front fan, reverse the removal procedure. Be sure to orient the air flow into the unit.
70 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis