HP Pro 4300 C9H67UT#ABA, D8C84UT#ABA, D3K21UT#ABA, D3K19UT D3K19UT#ABA, Pro 4300 B5P90UT#ABA manual

Models: D8C84UT#ABA D3K21UT#ABA D3K19UT D3K19UT#ABA Pro 4300 C9H69UT#ABA Pro 4300 B8T87UT B8T87UT#ABA Pro 4300 B5P90UT#ABA Pro 4300 C9H67UT#ABA

1 160
Download 160 pages 41.85 Kb
Page 59
Image 59

8.To install a new expansion card, hold the card just above the expansion socket on the system board then move the card toward the rear of the chassis (1) so that the bracket on the card is aligned with the open slot on the rear of the chassis. Press the card straight down into the expansion socket on the system board (2).

Figure 7-13Installing an Expansion Card

NOTE: When installing an expansion card, press firmly on the card so that the whole connector seats properly in the expansion card slot.

9.Rotate the slot cover retention latch back in place to secure the expansion card. Figure 7-14Closing the Expansion Slot Retainer

10.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed.

11.Replace the access panel.

12.If the computer was on a stand, replace the stand.

Removing or Installing an Expansion Card 51

Page 59
Image 59
HP Pro 4300 C9H67UT#ABA, D8C84UT#ABA, D3K21UT#ABA, D3K19UT D3K19UT#ABA, Pro 4300 B5P90UT#ABA, Pro 4300 C9H69UT#ABA manual