5.Rotate the drive cage back down to its normal position.

CAUTION: Be careful not to pinch any cables or wires when rotating the drive cage down.

Figure 7-19Rotating the Drive Cage Down

6.Slide the drive back until it stops, then lift it up and out of the drive cage. Figure 7-20Removing the 5.25-inch Drive

NOTE: When replacing a drive, transfer the four mounting screws from the old drive to the new one.

58 Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis

Page 66
Image 66
HP Pro 4300 C9H67UT#ABA, D8C84UT#ABA, D3K21UT#ABA manual Rotate the drive cage back down to its normal position