HP Pro 4300 B5P90UT#ABA, D8C84UT#ABA, D3K21UT#ABA, D3K19UT D3K19UT#ABA, Pro 4300 C9H67UT#ABA manual

3.Rotate up the drive bay housing to access the memory module sockets on the system board. Figure 7-6Rotating the Drive Cage Up

4.Open both latches of the memory module socket (1), and insert the memory module into the socket (2).

Figure 7-7Installing a DIMM

NOTE: A memory module can be installed in only one way. Match the notch on the module with the tab on the memory socket.

A DIMM must occupy the black XMM1 socket.

For maximum performance, populate the sockets so that the memory capacity is equal between Channel A and Channel B. Refer to Populating DIMM Sockets on page 44 for more information.

5.Push the module down into the socket, ensuring that the module is fully inserted and properly seated. Make sure the latches are in the closed position (3).

Installing Additional Memory 45