Insufficient memory error during operation.
Cause | Solution |
|
|
Too many Terminate and Stay Resident programs (TSRs) | Delete any TSRs that you do not need. |
are installed. |
|
|
|
You have run out of memory for the application. | Check the memory requirements for the application or add |
| more memory to the computer. |
|
|
Power LED flashes Red five times, once every second, followed by a two second pause, and the computer beeps five times. (Beeps stop after fifth iteration but LEDs continue flashing.)
Cause | Solution | |
|
|
|
Memory is installed incorrectly or is bad. | 1. | Reseat DIMMs. Power on the system. |
| 2. | Replace DIMMs one at a time to isolate the faulty |
|
| module. |
| 3. | Replace |
| 4. | Replace the system board. |
|
|
|
