ASSEMBLY
To make assembly easier, carefully read the following information and instructions:
o Assembly requires two persons.
Because of its weight and size, assemble the weight system in the location where it will be used. Make sure that there is enough clearance to walk around the weight system.
o Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
o For help identifying small parts, use the PART IDENTIFICATION CHART on page 5.
The Four Stages of the Assembly Process
Frame
Arm
o The following tools (not included) may be required for assembly:
two adjustable wrenches
one rubber mallet | _ |
one standard screwdriver
one Phillips screwdriver _cb======_
Assembly may be more convenient if you have a socket set, a set of
Cable
Seat
