,Attach the Top Frame (4) to the Upright (3) with
two M10 x 67mm Bolts (71), two M10 Washers | 74 |
(57), and two M10 Locknuts (56). Do not tighten the Locknuts yet.
71
Attach the Top Frame (4) to the Weight Guides
(21)with two M10 x 25mm Bolts (74). Do not tighten the Bolts yet.
See steps 2 to 7. Tighten the M10 Locknuts (56) and the M8 Locknuts (58).
,Attach the Leg Bumper (60) to the Front Leg (7) with an M4 x 20mm
9.Apply grease to an M10 x 64mm Bolt Set (76).
Attach the Leg Lever (8) to the Front Leg (7) with the M10 x 64mm Bolt Set (76). Make sure that the barrel of the Bolt Set is inserted through both sides of the bracket on the Front Leg.
60
\
76 Grease
10
