18.Apply grease to an M8 x 22mm Shoulder Bolt
Attach the Arm Cable (54) to the right Cable Pivot (39) with the M8 x 22mm Shoulder Bolt
(65)and an M8 Locknut (58).
19.Identify the Low Cable (53). Route the Low Cable through the Leg Lever (8) and the Front Leg (7).
Attach a Thick Pulley (48) inside the Leg Lever (8), above the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 13mm Spacers (52), and an M10 Locknut (56).
20.Attach a Thick Pulley (48) inside the Front Leg (7), above the Low Cable (53), with an M10 x 67mm Bolt (71), two M10 Washers (57), two 13mm Spacers (52), and an M10 Locknut (56).
18
Grease
65
19
48
53
20
56
48
14
