NordicTrack NATL81205.0 manual

Page 8

5.Have a second person hold the console assembly near the Uprights (69). Connect the Upright Wire Harness (98) and the Pulse Wire (66) to the wires extending from the console assembly. The connectors should slide together easily and snap into place. If they do not, turn one connector and try again. Then, insert the connectors into the console assembly.

Connect the Upright Ground Wire (11) to the ground wire extending from the console assembly. Make sure that the wires are fully connected. Then, insert the ground wires into the console assembly.

6.Set the console assembly on the Uprights (69). Make sure that no wires are pinched. Finger tighten a Console Bolt (78) with a Star Washer (77) into the lower hole in each Upright (only one side is shown).

Next, finger tighten a Short Console Bolt (106) with a Star Washer (77) into the upper hole in each Upright (69) (only one side is shown). Be careful not to drop the Short Console Bolts into the Uprights. Firmly tighten the two Console Bolts (78) and the two Short Console Bolts.

Insert an Upright Endcap (79) into the top of each Upright

(69)(only one side is shown). Note: Insert the end of the Upright Endcap indicated by the arrow first; use a rubber mallet if necessary.

7.Press the Latch Knob Sleeve (70) into the left Upright (69). Note: It may be helpful to use a rubber mallet to fully insert the Latch Knob Sleeve.

Remove the knob from the pin. Make sure that the collar and the spring are on the pin as shown. Note: If there are two collars, place one on each side of the spring.

Insert the pin into the Latch Knob Sleeve (70) and the left Upright (69).

Tighten the knob back onto the pin.

5

 

Console

 

Assembly

 

Ground

66

Wire

 

11

 

66

 

 

98

 

98

69

 

6

 

79

 

77

 

106

 

77

Console

 

78

Assembly

69

7

 

Knob

 

 

Spring

 

Collar

 

Pin

 

70

 

69

8.Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place; the allen wrench is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill.

8

Page 7 Page 9
Image 8
Page 7 Page 9
Contents Customer HOT Line QUESTIONS?Model No. NATL81205.0 Serial No Table of Contents Important Precautions Page Before YOU Begin Assembly Make sure that the power cord is unpluggedWheel Bolts the Wheels should turn freely Page HOW to USE the Chest Pulse Sensor HOW to PUT on the Chest Pulse SensorChest Pulse Sensor Care and Maintenance Chest Pulse Sensor TroubleshootingPRE-LUBRICATED Walking Belt Operation and AdjustmentHOW to Plug in the Power Cord Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeContacts-avoid moving your hands. When your Measure your heart rate if desiredTions below. Note If you use the chest pulse Sensor and the handgrip pulse sensor atTurn on the fan if desired Whenkey. you are finished exercising, removeHOW to USE a Preset Program Select one of the preset programsHOW to USE a Heart Rate Program Select a heart rate programEnter a maximum heart rate setting Audio Cable HOW to Connect Your MP3 Player or CD PlayerHOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Press the Play button on your MP3 player, CD Player, or VCRMeasure your heart rate if desired Return to the treadmill and stand on the foot Directly from OUR WEB SiteFollow the on-line instructions to start Program Information MODE/DEMO Mode HOW to Adjust the Cushioning SystemHOW to Move the Treadmill HOW to Fold and Move the TreadmillHOW to Fold the Treadmill for Storage HOW to Lower the Treadmill for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopProblem The chest pulse sensor does not function properly Conditioning Guidelines Exercise IntensityWorkout Guidelines Exercise FrequencyR0805A Key No. Qty DescriptionDescription Key No. Qty Exploded DRAWING-Model No. NATL81205.0 Exploded Drawing Shanghi Newlife Fitness Equipment, Inc HOW to Order Replacement PartsLimited Warranty

NATL81205.0 specifications

The NordicTrack NATL81205.0 is a standout treadmill designed to cater to fitness enthusiasts seeking an advanced exercise experience in the comfort of their own home. This model features a host of impressive specifications that support effective workouts for users of all fitness levels.

One of the main features of the NATL81205.0 is its powerful 3.0 CHP motor, delivering consistent performance for running or walking sessions. This motor ensures smooth transitions between speeds and inclines, making it a reliable choice for both casual users and serious runners.

The treadmill is equipped with a spacious running surface measuring 20 x 60 inches, providing ample room for users to stride comfortably. The belt is designed for durability and performance, ensuring it can withstand extensive use without compromising on quality.

An exceptional highlight of the NATL81205.0 is its innovative FlexSelect cushioning system, which allows users to adjust the level of cushioning on the running deck. This technology supports natural movement while minimizing the impact on joints, enhancing comfort during workouts.

Another notable feature is the incline capability, reaching up to 15%, which adds variety to workouts and boosts calorie burn. The automatic inclination feature allows users to change grades with a touch of a button, facilitating a more engaging and challenging exercise experience.

The treadmill incorporates a 10-inch Smart HD touchscreen display that provides clear visibility for tracking workout metrics such as time, distance, speed, calories burned, and heart rate. The console is also equipped with Bluetooth connectivity, allowing users to sync their devices and access music or streaming content during their workouts.

Additionally, integration with iFit technology opens up a world of possibilities. Users can experience interactive personal training with various live and on-demand workouts led by professional trainers. The iFit membership provides access to a library of global workouts, including scenic runs through exotic locations, which enhances motivation and keeps workouts fresh.

Finally, the NordicTrack NATL81205.0 is designed for easy folding and storage, featuring a space-saving design. It also comes with built-in speakers and a cooling fan, making it a convenient and comfortable choice for various fitness routines.

In summary, the NordicTrack NATL81205.0 is a top-tier treadmill that stands out with its powerful motor, impressive cushioning technology, sophisticated touchscreen interface, and integration with iFit. It is an investment in health and fitness, capable of accommodating a range of workout preferences and intensities. Whether you are training for a marathon or simply aiming to improve your fitness level, this treadmill is equipped to meet your needs.
Top Page Image Contents