NordicTrack NTTL90080 manual Assembly, Wrench Clip

Page 6

Assembly

Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Assembly

requires a phillips screwdriver

(not included).

1. With the help of a second person, carefully raise the Uprights (70) until the Wheels (30) are resting flat on the floor.

2.Remove the two indicated Screws (43) from the left Upright (70).

Attach the Storage Latch (5) and the two Latch Spacers

(93) to the left Upright (70) with the two Screws (43). Be careful not to overtighten the Screws.

Note: If it is difficult to fold or lower the treadmill, remove one or both of the Latch Spacers (93).

3. Remove the backing from the Wrench Clip (88). Press the Wrench Clip onto the left or right Upright (70) in the indi- cated location. Press the Allen Wrench (87) into the

Wrench Clip.

4.Make sure that all parts of the treadmill are properly tightened. Place a mat beneath the treadmill to protect the floor or carpet.

1

70

30

2

 

 

70

93

43

 

 

 

 

5

 

3

 

 

 

70

89

 

 

88

6

Image 6
Contents Customer Information Table of Contents Never leave the treadmill unattended while it Important Precautions Never move the walking belt while the power Never insert any object into any openingDecal in the location shown Before You Begin Assembly Wrench ClipTreadmill Operation Clip Key Diagram of the ConsoleFeatures of the Console Refer to milesHOW to USE the Manual Mode Optional CardioTrack heart rate monitor Follow your progress with the four displaysPULSE/CALORIES display TIME/PACE displaySelect one of the Incline programs HOW to USE the Incline ProgramsInsert the key fully into the console + button to start the programHOW to Select the Information Mode Thousands digits will be shown in the Speed displayHOW to Fold the Treadmill for Storage HOW to Move the TreadmillHOW to Lower the Treadmill for USE Hold the treadmill firmly with both hands, and lowerSymptom the Power Turns OFF During USE Maintenance and Trouble-shootingSymptom the Power does not Turn on Symptom AN Error Code E1 or E6 Appears on the ConsoleUnplug the Power Cord Symptom the Walking Belt Slows When Walked onEdges Magnet and the Reed Switch From the hood. Carefully remove the hoodExercise Steps Conditioning GuidelinesFactors in a Sensible Diet Any exercise programToe Touch Stretch Weight Loss TipsWarm up before you begin Hamstring StretchSession Get FIT with the PowerTreadBenefits of Aerobic Exercise Participate in strength trainingWorkout Tips Workout ProgramsHeart Rate Intensity Description Key No. Qty To find the parts listed below, refer toAttached in the center of this owner’s guide Pad ScrewBlack Wire, 2 Female Blue Wire, 2 FemaleDescription Service@nordictrack.com How to Order Replacement PartsManufacturer’s 90-Day Limited Warranty Call us Write usExploded Drawing-Model No. NTTL90080 To identify the parts shown on thisRefer to the Part List on page 22 of the owner’s guide Rev a