NordicTrack NTK14940 manual Assembly

Page 6

ASSEMBLY

Assembly requires two persons. Set the incline trainer in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.

Note: The underside of the incline trainer walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top of the walking belt or the shipping carton. This is a nor- mal condition and does not affect incline trainer performance. If there is lubricant on top of the walking belt, sim- ply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.

Assembly requires the included allen wrench and your own phillips screwdriver and

wire cutters . For help identifying the assembly hardware, see the hardware drawings below.

	3/4” Screw (66)–5	3/4” Tek Screw (94)–10
Washer (97)–2
3/4” Bolt (60)–4	1” Bolt (55)–6	3” Bolt (98)–2
3/4” Bolt (60)–4	1” Bolt (55)–6

1. To protect the floor during assembly, place a sheet	1
of cardboard under the pallet as shown.	1
With the help of a second person, carefully raise the	110
Upright (110) to the position shown.
While the other person holds the Upright (110), firmly
tighten two 1” Bolts (55) into the lower end of the
Upright and the Upright Base (96).		115
Insert the Power Cord (85) through the hole in the
Upright Cover (115). Press the Upright Cover onto the
Upright (110). Make sure that the Upright Cover is
securely held by the clips along the opening in the
Upright. Tighten a 3/4” Screw (66) into the lower end of
the Upright Cover.	55	66
	96	66
	96
	Cardboard	85
	Cardboard
	Pallet

6

Image 6

Contents QUESTIONS? Model No. NTK14940 Serial NoCustomer HOT Line Table of Contents Important Precautions Crush Zone Before YOU Begin Assembly Page Page Page Page Operation and Adjustment HOW to Plug in the Power CordPRE-LUBRICATED Walking Belt Console Diagram Features of the ConsoleHOW to Turn on the Power HOW to USE the Manual ModeTraining Zone Changedesired.the incline of the incline trainer asFollow your progress with the matrix Displays Incline/Elevation display-This displayMeasure your heart rate if desired Use the upper body handles if desiredTurn on the fans if desired HOW to USE a Speed Program or AN Incline Program If a speed pro- gram is selected, the speed settingFollow your progress with the displays Whenkey. you are finished exercising, removeHOW to Create a Custom Program Select one of the custom programsHOW to USE a Custom Program Current SegmentSelect a pulse program HOW to USE a Pulse ProgramPut on the optional chest pulse sensor Enter your ageEnter a maximum speed setting HOW to Connect Your Portable Stereo HOW to Connect Your Home Stereo HOW to Connect Your ComputerHOW to Connect Your VCR Audio Adapter CablePressVCR. the Play button on your CD player or Measure your heart rate if desired HOW to USE a Program Directly from OUR WEB Site Follow the on-line instructions to start ProgramInformation MODE/DEMO Mode Optional Chest Pulse SensorOptional Interactive Stand HOW to Fold and Move the Incline Trainer HOW to Fold the Incline Trainer for StorageHOW to Move the Incline Trainer HOW to Lower the Incline Trainer for USE Troubleshooting Problem The power turns off during useProblem The walking belt slows when walked on TopPage Workout Guidelines Conditioning GuidelinesExercise Intensity Exercise FrequencyR1004B Qty DescriptionOrdering Replacement Parts Description QtyExploded Drawing Exploded DRAWING-Model No. NTK14940 Limited Warranty